{"product_id":"audiocontrol-epic2000","title":"AudioControl EPIC2000","description":"\u003ch2\u003eAudioControl EPIC2000 2000W RMS Monoblock Subwoofer Amplifier\u003c\/h2\u003e\n\u003cp\u003ePower a demanding subwoofer system with the AudioControl EPIC2000, a compact Class D monoblock rated for up to 2,000W RMS at 1 ohm. Adjustable low-pass and subsonic filters, EPICBoost bass adjustment, and the included ACR-E remote level control help you tailor bass output to your speakers and enclosure.\u003c\/p\u003e\n\u003ch3\u003eRMS Power by Impedance\u003c\/h3\u003e\n\u003cp\u003eAudioControl specifies the following continuous output at \u003cstrong\u003e14.4V\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 ohms:\u003c\/strong\u003e 800W RMS × 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 ohms:\u003c\/strong\u003e 1,400W RMS × 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 ohm:\u003c\/strong\u003e 2,000W RMS × 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 2,000W rating applies at 1 ohm, not at every impedance or supply voltage. Match your subwoofer system's RMS handling and final wired load to the appropriate rating. A single EPIC2000 is stable down to 1 ohm; do not wire below that minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrapped operation:\u003c\/strong\u003e AudioControl lists 4,000W RMS × 1 at 2 ohms for a correctly configured strapped pair. This requires two amplifiers and the manufacturer's specified setup; it is not the output of one EPIC2000.\u003c\/p\u003e\n\u003ch3\u003eFilters and Bass Control\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-pass filter:\u003c\/strong\u003e 40–180Hz, 12dB\/octave Linkwitz-Riley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e Off–50Hz, 12dB\/octave Linkwitz-Riley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPICBoost:\u003c\/strong\u003e Variable 30–80Hz center frequency with 0–12dB gain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eACR-E remote level control:\u003c\/strong\u003e Included with cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSet the low-pass filter to blend the subwoofer with your speakers and match the subsonic setting to your enclosure, especially in a ported system. Bass boost increases amplifier and subwoofer demand. Establish correct gain and crossover settings before adding boost.\u003c\/p\u003e\n\u003ch3\u003ePower Wiring and Protection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\/ground wire size:\u003c\/strong\u003e 1\/0 AWG, listed by AudioControl as 0\/1 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker terminal wire gauge:\u003c\/strong\u003e 4 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-recommended fuse:\u003c\/strong\u003e 200A\u003c\/li\u003e\n\u003cli\u003eDirect-wire terminals with hex screws\u003c\/li\u003e\n\u003cli\u003eThermally efficient Class D design\u003c\/li\u003e\n\u003cli\u003eSmart auto-reset protection for output over-current, input over-voltage, input under-voltage, output DC offset, and over-temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse the EPIC2000-specific wiring specifications above, not the smaller 4-gauge power\/8-gauge speaker figures found in generic EPIC-series promotional copy. Have the complete power-wire run, battery-side fuse protection, grounding, charging capacity, and ventilation planned for the installation. Fuse selection must also protect the installed wire.\u003c\/p\u003e\n\u003cp\u003eA 2,000W system can place substantial demand on the vehicle's electrical system. Charging or battery upgrades may be needed depending on the vehicle and use. Protection circuits do not replace adequate voltage, correct wiring, or safe gain adjustment.\u003c\/p\u003e\n\u003ch3\u003eEpicenter Link: Processor Sold Separately\u003c\/h3\u003e\n\u003cp\u003eThe included 1-meter Epicenter Link harness simplifies connection to a compatible Epicenter bass-restoration processor. \u003cstrong\u003eThe processor is sold separately, and the EPIC2000 does not include built-in Epicenter bass restoration.\u003c\/strong\u003e EPICBoost is bass equalization, not the same function as harmonic bass restoration.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-level input range:\u003c\/strong\u003e 500mV–12V RMS, per AudioControl's current product specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10–190Hz, ±1dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 92.9dBA, referenced to 800W at 4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12.56 inches long × 6.1 inches wide × 2.01 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrapping capability:\u003c\/strong\u003e Yes, following the manufacturer's instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpicenter Link:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOlder AudioControl materials specify a 6V maximum input rather than 12V. Check the documentation supplied with your unit before selecting a high-voltage source. These are line-level input specifications; do not assume compatibility with every factory speaker-level signal. A factory-radio installation may require a separate signal converter or vehicle-specific interface.\u003c\/p\u003e\n\u003cp\u003eGeneral series copy cites a 91dB-plus signal-to-noise ratio and approximately 0.5–1A idle draw. Idle draw is not the current required at rated output. Use the model-specific specifications and actual system demand when planning the installation.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudioControl EPIC2000 amplifier\u003c\/li\u003e\n\u003cli\u003eWrench and screws\u003c\/li\u003e\n\u003cli\u003eACR-E remote level control and cable\u003c\/li\u003e\n\u003cli\u003eEpicenter Link 1-meter harness\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0581\/2240\/3900\/files\/EPIC2000_1500_1000_750_500qsg_rev-g.pdf?v=1755033512\"\u003eManual\u003c\/a\u003e and warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSubwoofers, enclosure, Epicenter processor, power wiring, fuse hardware, electrical upgrades, and any additional integration parts are sold separately.\u003c\/p\u003e\n\u003ch3\u003eLocal Installation in Killeen, Texas\u003c\/h3\u003e\n\u003cp\u003eBest Auto Sound \u0026amp; Security offers local installation in Killeen, Texas. Call 254-213-0501 for help matching your subwoofers, confirming final impedance, and planning electrical support and tuning. Installation and any additional required parts are quoted separately.\u003c\/p\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":71190308913265,"sku":null,"price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/4884\/5937\/files\/Screenshot_14-11-2026_12520_www.stingerdealer.com.jpg?v=1794682571","url":"https:\/\/12volttoys.com\/products\/audiocontrol-epic2000","provider":"Best Auto Sound \u0026 Security","version":"1.0","type":"link"}