{"product_id":"audiocontrol-epic500","title":"AudioControl EPIC500","description":"\u003ch3\u003eAudioControl EPIC500 500W RMS Monoblock Subwoofer Amplifier\u003c\/h3\u003e\n\u003cp\u003eAdd dedicated subwoofer power without giving up a large mounting area with the AudioControl EPIC500. This compact Class D monoblock delivers up to 500W RMS at 1 ohm and includes an ACR-E remote level control, so you can adjust subwoofer level from the driver's seat after the system is properly tuned.\u003c\/p\u003e\n\u003ch3\u003eRMS Power at Your Subwoofer's Impedance\u003c\/h3\u003e\n\u003cp\u003eAudioControl specifies the following continuous output at \u003cstrong\u003e14.4V and less than 1% THD\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 ohms:\u003c\/strong\u003e 250W RMS × 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 ohms:\u003c\/strong\u003e 350W RMS × 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 ohm:\u003c\/strong\u003e 500W RMS × 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 500W rating is not available at every impedance. Match the subwoofer's RMS handling and final wired impedance to the appropriate rating. A single EPIC500 is stable down to a 1-ohm load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrapped operation:\u003c\/strong\u003e AudioControl lists 1,000W RMS × 1 at 2 ohms for a properly configured strapped pair. This requires two amplifiers and the manufacturer's specified setup; it is not the output of one EPIC500.\u003c\/p\u003e\n\u003ch3\u003eFilters and Bass Adjustment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-pass filter:\u003c\/strong\u003e 40–180Hz, 12dB\/octave Linkwitz-Riley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e Off–50Hz, 12dB\/octave Linkwitz-Riley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPICBoost:\u003c\/strong\u003e Adjustable 30–80Hz center frequency with 0–12dB gain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote level control:\u003c\/strong\u003e ACR-E and cable included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSet the low-pass filter to blend the subwoofer with your speakers and choose the subsonic setting for the enclosure and subwoofer. Bass boost adds demand to the amplifier and subwoofer; it is not a substitute for correct gain adjustment or sufficient clean power.\u003c\/p\u003e\n\u003ch3\u003eEpicenter Link: Processor Sold Separately\u003c\/h3\u003e\n\u003cp\u003eThe included 1-meter Epicenter Link harness simplifies connection to a compatible Epicenter bass-restoration processor. \u003cstrong\u003eThe amplifier does not include an Epicenter processor or built-in Epicenter bass restoration.\u003c\/strong\u003e The processor is purchased separately. EPICBoost is an adjustable bass boost, not the same function as bass restoration.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Protection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompact, thermally efficient Class D design\u003c\/li\u003e\n\u003cli\u003eDirect-wire terminals with hex screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\/ground terminal wire size:\u003c\/strong\u003e 4 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker terminal wire size:\u003c\/strong\u003e 8 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-recommended fuse:\u003c\/strong\u003e 80A\u003c\/li\u003e\n\u003cli\u003eSmart auto-reset protection for output over-current, input over-voltage, input under-voltage, output DC offset, and over-temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse suitable power and ground wiring, a proper ground connection, and correctly located circuit protection. Final fuse selection must also protect the installed wire. Leave room for ventilation and cable routing; protection circuits do not replace proper installation.\u003c\/p\u003e\n\u003cp\u003eThe specified inputs are line-level. A factory-radio installation may require a separate compatible line-output converter or vehicle-specific interface. Do not assume the 12V input-signal rating means it accepts every factory speaker-level signal.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-level input range:\u003c\/strong\u003e 500mV–12V RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10–190Hz, ±1dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished signal-to-noise specification:\u003c\/strong\u003e 94dBA, referenced to 400W at 4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.9 inches long × 6.1 inches wide × 2.01 inches high\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAudioControl's published signal-to-noise reference uses 400W at 4 ohms, while its EPIC500 output table specifies 250W at 4 ohms. The noise-test reference is not an additional power rating. General EPIC-series promotional figures such as “91dB+” and approximately 0.5–1A idle draw should not be confused with model-specific output ratings.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudioControl EPIC500 amplifier\u003c\/li\u003e\n\u003cli\u003eWrench and screws\u003c\/li\u003e\n\u003cli\u003eACR-E remote level control and cable\u003c\/li\u003e\n\u003cli\u003eEpicenter Link 1-meter harness\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0581\/2240\/3900\/files\/EPIC2000_1500_1000_750_500qsg_rev-g.pdf?v=1755033512\"\u003eManual\u003c\/a\u003e and warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSubwoofers, enclosures, Epicenter processors, power wiring, fuse hardware, and any additional integration parts are sold separately.\u003c\/p\u003e\n\u003ch3\u003eLocal Installation in Killeen, Texas\u003c\/h3\u003e\n\u003cp\u003eBest Auto Sound \u0026amp; Security offers local installation in Killeen, Texas. Call 254-213-0501 for help matching your subwoofer, confirming final impedance, and planning power wiring and tuning. Installation and any additional required parts are quoted separately.\u003c\/p\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":68808100970609,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/4884\/5937\/files\/Screenshot_13-11-2026_114957_www.stingerdealer.com.jpg?v=1794592316","url":"https:\/\/12volttoys.com\/products\/audiocontrol-epic500","provider":"Best Auto Sound \u0026 Security","version":"1.0","type":"link"}