{"product_id":"ax-loc2-4-pro","title":"Axxess AX-LOC2.4-PRO 2-In\/4-Out LOC | Bass Boost","description":"\u003ch3\u003eFlexible Factory-Stereo Integration with 2 Inputs and 4 Outputs\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eAxxess AX-LOC2.4-PRO\u003c\/strong\u003e is an active line output converter built to add aftermarket amplifiers to factory radios. Its 2-in\/4-out layout gives installers more routing flexibility than a basic LOC, while the selectable input impedance, trigger modes, gain controls, noise-isolation options, and rear-channel bass boost make it easier to match the converter to the vehicle and the system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Inputs \/ 4 Outputs:\u003c\/strong\u003e Converts factory speaker-level signals for flexible aftermarket amplifier integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40V Input Handling:\u003c\/strong\u003e Supports up to 40V or 400W at 20k ohms for high-output factory systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Input Impedance:\u003c\/strong\u003e Choose 20 ohms, 60 ohms, or 20k ohms to match the OEM source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Turn-On Trigger:\u003c\/strong\u003e Select REM, DC, or AUDIO trigger modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear-Channel Bass Boost:\u003c\/strong\u003e Adjustable from 0dB to +12dB for additional subwoofer control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent Front\/Rear Gain:\u003c\/strong\u003e Adjust gain from –28dB to +1dB for better system balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround and Noise Isolation:\u003c\/strong\u003e Select GND, ISO, or 200-ohm ground settings to help manage installation noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Voltage RCA Output:\u003c\/strong\u003e Provides up to 9.5V RMS output at 13.8V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional AX-RM1 Remote:\u003c\/strong\u003e Add the Axxess remote control for convenient subwoofer-level adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Axxess AX-LOC2.4-PRO\u003c\/li\u003e\n\u003cli\u003eType: Active line output converter\u003c\/li\u003e\n\u003cli\u003eInput\/output configuration: 2 inputs \/ 4 outputs\u003c\/li\u003e\n\u003cli\u003eMaximum input level: 40V \/ 400W at 20k ohms\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 9V–16V\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 0.5V–20V\u003c\/li\u003e\n\u003cli\u003eInput impedance selection: 20 \/ 60 \/ 20k ohms\u003c\/li\u003e\n\u003cli\u003eOutput maximum: 9.5V RMS at 13.8V\u003c\/li\u003e\n\u003cli\u003eTurn-on trigger: Remote, DC, or audio sensing\u003c\/li\u003e\n\u003cli\u003eRemote output rating: 500mA\u003c\/li\u003e\n\u003cli\u003eDC trigger range: 3V–7V\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: Greater than 110dB at 6.4V output\u003c\/li\u003e\n\u003cli\u003eTHD+N: Less than 0.01%\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eRear-channel low-pass filter: Less than 250Hz\u003c\/li\u003e\n\u003cli\u003eRear-channel bass boost: 0dB to +12dB\u003c\/li\u003e\n\u003cli\u003eFront\/rear gain adjustment: –28dB to +1dB\u003c\/li\u003e\n\u003cli\u003eRemote: Optional AX-RM1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose the AX-LOC2.4-PRO?\u003c\/h3\u003e\n\u003cp\u003eA factory radio does not need to be replaced just because it lacks RCA outputs. The AX-LOC2.4-PRO creates a practical bridge between the OEM signal and aftermarket amplifiers, with the control needed to handle different factory loads and system designs. The four-output configuration is especially useful when building a system with separate front, rear, or subwoofer amplification.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the factory radio's output level, amplifier requirements, trigger method, and available mounting space before installation. Set the input impedance and gain carefully, then use the rear-channel filter and bass boost to match the subwoofer section. Professional installation is available at Best Auto Sound \u0026amp; Security in Central Texas.\u003c\/p\u003e","brand":"Axxess","offers":[{"title":"Default Title","offer_id":44446743658609,"sku":null,"price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/4884\/5937\/files\/Screenshot_3-9-2026_101848_www.metraonline.com.jpg?v=1788448820","url":"https:\/\/12volttoys.com\/products\/ax-loc2-4-pro","provider":"Best Auto Sound \u0026 Security","version":"1.0","type":"link"}