DS18 PRO-TW1L
DS18 PRO-TW1L RGB Super Bullet Tweeters — Pair
Add high-output treble and RGB lighting to your car audio build with the DS18 PRO-TW1L super bullet tweeter pair. A transparent polycarbonate body and bullet illuminate your installation, while the aluminum diaphragm delivers upper-frequency detail alongside a properly matched midrange speaker system.
Key Features
- Quantity: Sold as a pair
- Nominal size: 3.8 inches / 96.5mm
- Nominal impedance: 4 ohms
- Sensitivity: 103 dB at 1W/1m
- Frequency response: 3.5kHz–20kHz
- Voice coil: 1 inch / 25.4mm, Kapton former, CCA winding
- Diaphragm: Aluminum
- Magnet: 8-ounce Y30 ferrite
- Housing and bullet: Transparent polycarbonate with a translucent RGB-illuminated finish
- RGB input wire: 3.2 feet
- Capacitor crossover included
- Serviceable replacement diaphragm design
Power Ratings Explained
DS18's current PRO-TW1L specification table lists 60W AES, 120W program, and 240W peak power handling. These are different ratings, not interchangeable continuous-power figures. Plan amplifier output and filtering around the AES specification rather than treating program or peak power as a continuous target.
Manufacturer materials are inconsistent: the feature list calls 120W “RMS,” while the linked manual lists 200W RMS/400W maximum and the overview also mentions the different PRO-TW4L model. This listing uses the current model-specific specification table rather than those conflicting claims. Confirm the rating supplied with your particular unit before final amplifier setup.
RGB Lighting and System Setup
Use a compatible RGB controller to select lighting colors and effects. DS18 identifies the LED-BTC and LC-RGB as controller options; the controller is sold separately. Plan the lighting wiring separately from the speaker connections and follow the controller's instructions.
These are high-frequency tweeters, not full-range speakers. DS18's current table recommends a 4kHz high-pass crossover. The included capacitor filters low frequencies, but correct crossover configuration, clean amplifier output, and proper gain adjustment are still important. Do not feed the tweeters unfiltered bass or assume the capacitor makes every amplifier setting safe.
Mounting Dimensions
- Overall diameter: 3.78 inches / 96mm
- Overall depth: 1.78 inches / 45mm
- Front mounting cutout: 2.8 inches / 72mm, as listed by DS18
- Mounting depth: 1.57 inches / 40mm
- Magnet diameter: 2.76 inches / 70mm
The 1-inch specification refers to the voice coil, not the mounting opening. Measure the actual tweeter and available panel space before cutting, and check rear and grille clearance. These are not guaranteed direct replacements for factory tweeters; custom mounting or panel modification may be needed.
Replacement Diaphragms
DS18 lists the PRO-TW1VC 4-ohm replacement diaphragm for the PRO-TW1L. Its product page also references the PRO-TW1.8VC 8-ohm version. Replacement diaphragms are sold separately; confirm the required version before ordering. An 8-ohm replacement is not electrically equivalent to the original 4-ohm configuration.
What's Included
One pair of DS18 PRO-TW1L RGB super bullet tweeters with capacitor crossovers. RGB controllers, amplifiers, replacement diaphragms, and additional mounting or integration materials are sold separately.
Local Installation in Killeen, Texas
Best Auto Sound & Security offers local installation in Killeen, Texas. Call 254-213-0501 for help with fitment, RGB control, amplifier matching, and system tuning. Installation and any additional required parts are quoted separately.