AudioControl EPICSIX

AudioControl EPICSIX

$279.99
Sale price  $279.99 Regular price  $299.99
Skip to product information
AudioControl EPICSIX

AudioControl EPICSIX

$279.99
Sale price  $279.99 Regular price  $299.99

AudioControl EPICSIX 1200W RMS 6-Channel Class D Amplifier

Build a flexible multi-speaker system around the AudioControl EPICSIX, a compact full-range Class D amplifier with six powered channels. It delivers 100W RMS per channel at 4 ohms or 200W RMS per channel at 2 ohms, with channel-specific crossovers and selected bridging options for more involved system designs.

RMS Power by Configuration

AudioControl specifies continuous output at 14.4V and less than 1% THD:

  • 4-ohm stereo: 100W RMS × 6
  • 2-ohm stereo: 200W RMS × 6
  • 4-ohm bridged: 400W RMS × 2 using channel pairs 3/4 and 5/6

The 1,200W rating is the combined output of six channels at 2 ohms, not power per channel. Match each speaker's RMS handling and final load to the selected configuration. Use no lower than 2 ohms per unbridged channel or 4 ohms per supported bridged pair.

Important Channel and Bridging Restrictions

Channels 1 and 2 cannot be bridged. Only channels 3/4 and 5/6 are specified as bridgeable pairs. Do not assume all adjacent speaker terminals form a bridgeable pair; the manual identifies a different physical terminal arrangement for channels 1/2 versus channels 3–6.

Follow AudioControl's terminal markings, input-mode settings, and wiring diagrams for your chosen layout. Six-channel, active three-way front-stage, five-channel, and selected bridged configurations are possible when the signal routing, crossovers, and speaker loads are planned correctly. These are alternative configurations, not additional outputs available simultaneously.

Channel-Specific Crossover Control

  • High-pass filters: Available on channels 1–6; Off or 50–5,000Hz
  • Low-pass filters: Available on channels 3–6; published adjustment range 50–5,000Hz
  • Filter slope: 12dB/octave Linkwitz-Riley

Channels 1/2 have high-pass filtering only. Channels 3–6 add low-pass filtering for more flexible driver assignments. Check the manual's filter and range-switch settings before planning an active system.

Choose crossover frequencies and slopes for the actual speakers. Tweeters need suitable filtering and conservative gain adjustment; the availability of a crossover does not guarantee protection at every setting. For a bridged subwoofer installation, confirm the final impedance and apply an appropriate low-pass signal and enclosure-specific filtering.

Construction and Installation

  • Compact, thermally efficient full-range Class D design
  • High-current design with 2-ohm unbridged stability
  • Smart auto-reset protection circuit
  • Solid direct-wire power and speaker terminals with hex screws
  • Power/ground wire gauge: 4 AWG
  • Speaker terminal wire gauge: 10 AWG
  • Manufacturer-recommended fuse: 125A

Plan suitable power wiring, a reliable ground, battery-side circuit protection, ventilation, and charging capacity for the complete system. Fuse selection must also protect the installed wire for its material, size, and run length. Protection circuitry does not replace correct wiring or safe gain adjustment.

Technical Specifications

  • Line-level input range: 500mV–12V RMS
  • Frequency response: 10Hz–24kHz, ±3dB
  • Signal-to-noise ratio: 98dBA, referenced to 100W at 4 ohms
  • Dimensions, W × L × H: 6.1 × 12.56 × 2.01 inches
  • Metric dimensions, W × L × H: 155 × 319 × 51mm

The specified inputs are line-level. A factory-radio installation may require a separate compatible signal converter or vehicle-specific interface. Do not assume the 12V signal-input rating establishes compatibility with every factory speaker-level output.

What's Included

  • AudioControl EPICSIX amplifier
  • Wrench and screws
  • User manual

Speakers, subwoofers, power wiring, fuse hardware, signal cables, and any additional installation or integration parts are sold separately. A remote level control is not listed among the included components.

Local Installation in Killeen, Texas

Best Auto Sound & Security offers local installation in Killeen, Texas. Call 254-213-0501 for help with channel assignments, active speaker layouts, bridging, wiring, and system tuning. Installation and any additional required parts are quoted separately.

Recommended products you may also like