EPICENTER PRO Bass Restoration Processor with Line Driver
AudioControl The Epicenter Pro Bass Restoration Processor & Line Driver
Bring more low-frequency impact to music that sounds thin through your subwoofer system with the AudioControl Epicenter Pro. Its bass-restoration circuit analyzes musical harmonics and recreates lower-frequency information, while the built-in line driver and included ACR-4 dual-function remote help you match the signal and bass effect to your system.
Bass Restoration, Not Just Bass Boost
Rather than only turning up bass already in the recording, the Epicenter Pro uses upper-frequency harmonic information to generate lower bass notes. Results depend on the music, signal source, and system setup. ParaBASS controls let you shape the restored bass's center frequency and width, while the remote adjusts the restoration effect and overall output level.
Key Features
- AudioControl's original digital bass-restoration circuitry
- Balanced line-level inputs and a built-in high-headroom line driver
- Selectable output voltage for matching your amplifier's input range
- ParaBASS controls for shaping the restored low-frequency response
- Selectable 24Hz PFM high-pass/subsonic filter or bypass
- Dynamic LED display indicating bass-restoration activity
- Included ACR-4 dual-function dash remote and remote cable
Important ACR-4 Remote Requirements
The included ACR-4 must be connected for bass restoration and remote output-level control. Its outer knob adjusts the Bass Maximizer effect, and its inner knob adjusts output level. With the remote unplugged, AudioControl specifies no Bass Maximizer effect and no volume attenuation.
This model is designed for the ACR-4 only. Do not substitute an ACR-1: AudioControl warns that an ACR-1 severely reduces output regardless of knob position.
Signal Matching and Installation
The line driver raises line-level signal voltage to help establish a suitable signal level for an aftermarket amplifier. Balanced inputs can help reduce interference, but they do not guarantee a noise-free installation. Proper grounding, wiring, and gain setup remain important.
This is a signal processor, not a speaker-power amplifier. Its output-voltage ratings are signal levels, not amplifier wattage. Match the selected output to your amplifier's input capability rather than automatically choosing the highest setting.
Plan around the specified line-level input connection. Do not assume this model provides the speaker-level integration features of an Epicenter Micro model. Any additional vehicle-specific interface or signal-conversion equipment needed for your installation is sold separately.
The 24Hz PFM filter can reduce unwanted very-low-frequency content; it is not a substitute for choosing appropriate subwoofer crossover settings, enclosure tuning, or safe amplifier output. Bypass should be selected only when appropriate for the system.
Technical Specifications
Inputs and Outputs
- Maximum line-level input: 10Vrms
- Line-level input impedance: 7kΩ
- Maximum output: 9Vrms / 13V peak at less than 1% THD
- Output impedance: 150Ī©
Performance and Power
- Total harmonic distortion: 0.03%
- Signal-to-noise ratio: Greater than 105dB
- Frequency response: 10Hzā22kHz, ±1dB
- PFM high-pass filter: Selectable 24Hz or bypass
- Power supply: High-headroom PWM switching
- Current draw: 300mA
- Recommended fuse: 1A
Dimensions and Weight
- Dimensions: 8 inches long Ć 5.5 inches deep Ć 1.2 inches high
- Unit weight: 1.7 lb
What's Included
- AudioControl The Epicenter Pro processor
- ACR-4 dual-function remote
- Remote cable
- User manual
Amplifiers, subwoofers, audio interconnects, and any additional installation or integration parts are sold separately.
Local Installation in Killeen, Texas
Best Auto Sound & Security offers local installation in Killeen, Texas. Call 254-213-0501 for help planning signal integration, remote placement, gain matching, and bass tuning. Installation and any additional required parts are quoted separately.