SoundQubed HDB2-210LE-D4 Dual 10" Loaded Ported Subwoofer Enclosure 800W RMS

SoundQubed HDB2-210LE-D4 Dual 10" Loaded Ported Subwoofer Enclosure 800W RMS

$479.99
Sale price  $479.99 Regular price 
Skip to product information
SoundQubed HDB2-210LE-D4 Dual 10" Loaded Ported Subwoofer Enclosure 800W RMS

SoundQubed HDB2-210LE-D4 Dual 10" Loaded Ported Subwoofer Enclosure 800W RMS

$479.99
Sale price  $479.99 Regular price 

Plug-and-Play Bass That Hits Hard — SoundQubed HDB2-210LE-D4 Dual 10" Loaded Ported Enclosure

Skip the guesswork of matching a box to a subwoofer. The SoundQubed HDB2-210LE-D4 is a factory-matched, loaded and ported dual 10" subwoofer enclosure that delivers 800W RMS and 1600W peak power right out of the box. Two 4-ohm dual voice coil subwoofers wired in parallel to a 1-ohm final load give you maximum power transfer from your amplifier, while the 35Hz port tuning keeps the bass tight, deep, and controlled. Whether you're building a daily driver or an SPL setup, this loaded enclosure gives you serious bass in a mid-sized footprint without the hassle of a custom build.

Key Features

  • Dual 10" Subwoofers — Factory Matched: Two SoundQubed HDB2 series subwoofers pre-installed and tuned to the enclosure for optimal performance.
  • 800W RMS / 1600W Peak Power Handling: Built for high-output amplifiers and real-world SPL use.
  • Dual 4-Ohm Voice Coils — 1-Ohm Final Load: Wired in parallel for maximum power delivery from a mono amplifier.
  • 94dB Sensitivity: High efficiency means more output per watt — loud even with modest amplifier power.
  • Frequency Response: 29Hz–250Hz: Deep, extended low-end with a wide usable range for music and SPL applications.
  • Side-Ported Enclosure Tuned to 35Hz: Ported design maximizes output and low-frequency extension while keeping bass tight and punchy.
  • 5/8" MDF Construction: Rigid, resonance-free cabinet walls for clean, accurate bass reproduction.
  • Black Vinyl Finish: Clean, professional look that fits any trunk or cargo area build.
  • Plug-and-Play Installation: No box building, no guessing — just wire it to your amp and go.

Specifications

  • Configuration: Dual 10" Loaded Ported Enclosure
  • RMS Power: 800W
  • Peak Power: 1600W
  • Voice Coil: Dual 4-Ohm per woofer
  • Final Load (Parallel): 1 Ohm
  • Sensitivity: 94dB
  • Frequency Response: 29Hz–250Hz
  • Port Tuning: 35Hz (Side Port)
  • Enclosure Material: 5/8" MDF
  • Finish: Black carpet

Why the HDB2-210LE-D4?

This loaded enclosure is the smart choice for anyone who wants serious bass without the time and cost of a custom build. SoundQubed has already done the engineering — the box volume, port tuning, and subwoofer matching are all dialed in from the factory. Pair it with a quality mono amplifier and you'll have a system that sounds like it was custom built, because in a way, it was.

Professional installation available at Best Auto Sound & Security in Central Texas. Contact us to schedule your build.

Recommended products you may also like